Philips HTS3152 Bedienungsanleitung PDF herunterladen (Seite 37)

English

Audio Setup Page (underlined options are the factory default settings)

Speakers Volume

Access the speaker’s level setup menu. Use   keys to adjust

the volume level for each connected speaker between -6dB to

+6dB.

See ‘Getting Started - Setting the speakers’ channels’.

Speakers Delay

Access the speaker’s distance setup menu. Use   keys to set

the delay times for the centre and rear speakers based on the

listening position and distance.

See ‘Getting Started - Setting

the speakers’ channels’.

Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot

change in distance. Use the longer delay time settings when the rear

speakers are closer to the listener than the front speakers.

CD Upsampling

This feature enables you to convert the music CD to a

higher sampling rate using sophisticated digital signal

processing for better sound quality.

{ Off } – Turn off CD-upsampling.

{ 88.2 kHz (X2) } – To convert the sampling rate of the CDs

twice as high as the original rate.

Notes:

–

If you have activated the CD upsampling

feature, the audio output

automatically switches to stereo mode.

–

If you press the SURROUND button on the remote control to select

multi-channel mode, it turns off the CD upsampling feature.

Audio Sync

This feature allows you to adjust the audio delay times if the

video playback is slower than the audio output streams.

Use   keys to set the delay times for the audio output

between 0~200ms.

Setup Menu Options (continued)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

Keine Kommentare

Philips HTS3152 Bedienungsanleitung Seite 37