Philips HTS3538 Spezifikationen PDF herunterladen (Seite 9)

7

English

EN

Note

•

Depending on the manufacturer, HDMI-CEC is

known by many names. For information on your

device, see the user manual of the device.

• Philips does not guarantee 100% interoperability

with all HDMI-CEC devices.

Before you start

• Connect your home theater to the HDMI-

CEC compliant device through HDMI

connection.

• Make the necessary connections described in

the quick start guide, and then switch the TV

to the correct source for your home theater.

Enable EasyLink

1 Press SETUP.

2 Select [Video Setup] and then press OK.

3 Select [HDMI Setup] > [EasyLink Setup] >

[EasyLink] > [On].

4 On your TV and other connected devices,

turn on HDMI-CEC control. For details, see

the user manual of the TV or other devices.

• On your TV, set the audio output to

'Amplier' (instead of TV speakers). For

details, see the TV user manual.

EasyLink controls

With EasyLink, you can control your home theater,

TV, and other connected HDMI-CEC compliant

devices with a single remote control.

• [One Touch Play] (One-touch play): When a

video disc is in the disc compartment, press

to wake up the TV from standby, and

then play a disc.

• [One Touch Standby] (One-touch standby):

If one-touch standby is enabled, your home

theater can switch to standby with the

remote control of the TV or other HDMI-

CEC devices.

Note

• To change the EasyLink control settings, press

SETUP, select [Video Setup] > [HDMI Setup] >

[EasyLink Setup].

4 Use your home

theater

This section helps you use the home theater to

play media from a wide range of sources.

Before you start

• Make the necessary connections described in

the quick start guide or download the complete

user manual from www.philips.com/support.

• Switch the TV to the correct source for your

home theater (for example, HDMI, AV IN).

Discs

Your home theater can play DVDs, VCDs, and

CDs. It can also play discs that you’ve made at

home, such as CD-R discs of photos and music.

1 Insert a disc into the home theater.

2 If the disc does not play automatically, press

DISC.

3 Use the remote control to control play.

Synchronize picture and sound

If the audio and video are not synchronized, delay

the audio to match the video.

1 While playing video, press and hold AUDIO

SYNC.

» Audio sync menu is displayed.

2 Press the +/- or Navigation buttons to

synchronize the audio with the video, and

then press OK.

Note

•

Picture and sound can be synchronized through

the setup menu of your home theater, press

SETUP, select [Audio Setup] > [Audio Sync].

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare