Philips SC2004/11 Bedienungsanleitung PDF herunterladen (Seite 26)

Problem Possible cause Solution

The wall socket is

not live.

Connect another appliance to the wall socket to check

if the wall socket is live. If the socket is live but the

appliance still does not charge, contact the Consumer

Care Centre in your country, your Philips dealer or a

Philips service centre.

The adapter is not

inserted properly

into the wall

socket and/or the

small plug is not

inserted properly

into the appliance

socket.

Make sure the adapter is inserted properly into the

wall socket and/or the small plug is inserted properly

into the appliance socket.

The appliance is

defective.

Contact the Consumer Care Centre in your country,

your Philips dealer or a Philips service centre.

I have switched on the

appliance but I cannot

increase or decrease the

light intensity.

The appliance has

to be reset.

To reset the appliance, switch off the appliance and

then switch it on again. If you still cannot adjust the

light intensity, contact the Consumer Care Centre in

your country, your Philips dealer or a Philips service

centre.

The ‘ready to ash’ light

does not go on when I

place the appliance on

the skin.

You have not put

the attachment

with safety ring

properly on the

skin.

Place the appliance at a 90° angle onto the skin in such

a way that all contact switches touch the skin. Then

check if the ‘ready to ash’ light is on and press the

ash button.

If this does not work, place the appliance on a part

of your body where it is easy to establish full skin

contact, for example on your lower arm.Then check

if the ‘ready to ash’ light works. If the ‘ready to ash’

light still does not go on when you place the appliance

on the skin, contact the Consumer Care Centre in

your country, your Philips dealer or a Philips service

centre.

The safety ring is

dirty.

Clean the safety ring carefully. If you are unable

to clean the safety ring properly, contact the

Consumer Care Centre in your country, your Philips

dealer or a Philips service centre to replace the

attachment.

The ‘ready to ash’ light

does not go on when I

place the attachment on

my skin, but the cooling

fan works.

The overheat

protection has

been activated.

When the overheat protection has been activated,

the fan still works. Do not switch off the appliance

and let it cool down for approx. 15 minutes before

you continue to use it. If the ‘ready to ash’ light still

does not go on when you place the appliance on

the skin, contact the Consumer Care Centre in your

country, your Philips dealer or a Philips service centre.

ENGLISH26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips SC2004/11 Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hautpflegegeräte Philips SC2004/11