INTRODUCTION 5
English
Notes with regard to the installation location
- Install device on horizontal surface only.
- Do not expose this device to extreme temperatures.
Therefore:
-Avoid direct solar radiation and radiator heat;
-Do not obstruct the air ventilation by covering the
ventilation openings with objects, like for example
magazines, table cloths, curtains, etc.;
-Leave a minimum clearance of approx. 40 cm above and
to the sides. The heat may not accumulate in the device!
Otherwise the heat can damage the device, and there is
fire hazard!
- The device may not be installed close to inflammable
material (e. g. curtains, flammable liquids, etc.).
Batteries
- Batteries are to be kept away from children.
- After swallowing a button cell or battery, the person
concerned has to consult a doctor immediately.
- Do not try to reactivate used batteries by heat,
charging, or by other means.
- Batteries may not be thrown into the fire, disassembled,
or short-circuited.
- Replace the batteries at least one a year to prevent
them from leaking.
- Always replace both batteries and use batteries of the
same type only (e. g. alkaline cells or zinc/carbon).
- If you are absent for a longer time, remove the batteries
from the RC unit.
Miscellaneous notes
- Do not place open fire sources, like for example burning
candles, on the device.
- The antenna that is used has to be grounded.
- Only switch the device on after the connections with
the antenna and the SCART cable have been established.
- The bottom side of the device features the device feet.
Because the furniture or floor surfaces consist of
various materials and are treated with various care
products, it cannot be completely ruled out that some
of these materials contain components affecting and
moistening the feet of the device. If required, place a
non-slip mat underneath the feet.
- Opening the device results in loss of warranty.
This symbol indicates that the adapter is a
Class II appliance and does not require an earth
connection.
This symbol indicates that the adapter is for
indoor use only.
This symbol indicates that the adapter conforms
to CE regulations.
Environmental Markings
Your product has been designed and manufac-
tured with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to
a product or his packaging, it means the product is cov-
ered by European Directive 2002/96/EC.
Please inform yourself about the local separate collection
system for electronic products.
Please act according to your local rules and do not dis-
pose of your old products with your normal household
waste. The correct disposal of your old product will help
prevent potential negative consequences for the environ-
ment and human health.
The "Material recyclability symbol" affixed on
package cardboard and user manual means these
parts are recyclable. So do not dispose of them
with your normal household waste.
The "Material recyclability symbol" affixed on plas-
tic packaging parts means these parts are recycla-
ble.So do not dispose of them with your normal
household waste.
The "Green Dot" affixed on cardboard means
PHILIPS pays a financial duty to the "Avoidance
and Recovery of Packaging Waste" organization.
(2 Seiten)
(23 Seiten)
(112 Seiten)
(134 Seiten)
(100 Seiten)
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern