Philips 272P4QPJKEB/00 Bedienungsanleitung PDF herunterladen (Seite 32)

30

9. Troubleshooting & FAQs

• Shut down your computer, disconnect your

old monitor and reconnect your Philips

monitor.

• Turn on your monitor and then turn on

your PC.

Q2: What is the recommended refresh

rate for monitor?

Ans.: Recommended refresh rate in monitors

is 60 Hz, In case of any disturbance on

screen, you can set it up to 75 Hz to

see if that removes the disturbance.

Q3: Whatarethe.infand.icmlesonthe

CD-ROM? How do I install the drivers

(.inf and .icm)?

Ans.: These are the driver les for your

monitor. Follow the instructions in your

user manual to install the drivers. Your

computer may ask you for monitor

drivers (.inf and .icm les) or a driver

disk when you rst install your monitor.

Follow the instructions to insert the

companion CD-ROM included in this

package. Monitor drivers (.inf and .icm

les) will be installed automatically.

Q4: How do I adjust the resolution?

Ans.: Your video card/graphic driver and

monitor together determine the

available resolutions. You can select the

desired resolution under Windows

®

Control Panel with the "Display

properties".

Q5: What if I get lost when I am making

monitor adjustments via OSD?

Ans.: Simply press the button, then select

[Reset to recall all the original factory

settings.

Q6: Is the monitor screen resistant to

scratches?

Ans.: In general it is recommended that

the panel surface is not subjected to

excessive shocks and is protected from

sharp or blunt objects. When handling

the monitor, make sure that there is

no pressure or force applied to the

panel surface side. This may affect your

warranty conditions.

Q7: How should I clean the monitor

surface?

Ans.: For normal cleaning, use a clean, soft

cloth. For extensive cleaning, please use

isopropyl alcohol. Do not use other

solvents such as ethyl alcohol, ethanol,

acetone, hexane, etc.

Q8: Can I change the color setting of my

monitor?

Ans.: Yes, you can change your color setting

through OSD control as the following

procedures:

• Press button to show the OSD (On

Screen Display) menu

• Press ▼ button to select the option

[Color] then press button to enter

color setting, there are three settings as

below.

1. Color Temperature: The six settings are

5000K, 6500K, 7500K, 8200K, 9300K

and 11500K. With settings in the 5000K

range the panel appears "warm, with a

red-white color tone", while a 11500K

temperature yields "cool, bluewhite

toning".

2. sRGB: This is a standard setting for

ensuring correct exchange of colors

between different device (e.g. digital

cameras, monitors, printers, scanners,

etc).

3. User Dene: The user can choose his/

her preference color setting by adjusting

red, green blue color.

Note

A measurement of the color of light radiated

by an object while it is being heated. This

measurement is expressed in terms of

absolute scale, (degrees Kelvin). Lower Kevin

temperatures such as 2004K are red; higher

temperatures such as 9300K are blue. Neutral

temperature is white, at 6504K.

1 2 ... 27 28 29 30 31 32 33 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare