Philips AJ3232B/79 Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
Specications
Amplier
Rated Output Power 0.4 W RMS
Tuner
Tuning Range FM: 87.5-108 MHz;
MW: 531-1602 KHz
Tuning Grid FM: 50 KHz;
MW: 9 KHz
Number of presets FM: 20;
MW: 20
General information
AC power 220-240V~ 50/60Hz
Operation Power
Consumption
8 W
Standby Power Consumption <1 W
Dimensions:
- Main Unit (W x H x D) 190 x 94 x 62 mm
Weight: - Main Unit 0.55 kg
Press SLEEP repeatedly to select a time period (in minutes).
» The product switches to standby mode automatically
after the preset period.
» When [OFF] is displayed, the sleep timer is deactivated.
Tip: For better reception, fully extend and adjust the
position of the antenna.
Prepare radio antenna
Select FM/MW radio
Tune to FM/MW radio stations
Store FM/MW radio stations automatically
1 Select FM or MW radio.
2 Tune to a radio station.
3 Press and hold PRESET for two seconds.
» The preset number begins to blink.
4 Press - TUNING + to select a number.
5 Press PRESET again to conrm.
6 Repeat steps 2 to 5 to store other stations.
Note:
You can store a maximum of 20 FM radio
stations and 20 MW radio stations.
To overwrite a pre-stored radio station, store
another one with its sequence number.
Store FM/MW radio stations manually
X20
Select a preset radio station
To download the full user manual,
visit www.philips.com/support.
Note:
You can only set the alarm in standby mode.
Make sure that you have set the clock correctly.
Set alarm
Press AL1 or AL2 reepeatedly to activate or deactivate
the alarm timer.
» If the alarm timer is activated, the alarm indicator
for the radio or buzzer is displayed.
» If the alarm timer is deactivated, the alarm indicator
disappears.
To stop the alarm, press the corresponding AL1
or AL2.
» The alarm repeats ringing for the next day.
Note: When the alarm sounds, volume increases
gradually to the maximum alarm volume. You cannot
adjust the alarm volume manually.
When the alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine minutes later.
AJ3232_79_QSG_V2.0.indd 2 6/6/2017 4:11:17 PM
Seitenansicht 1
1 2

Kommentare zu diesen Handbüchern

Keine Kommentare