Philips MCW770/37 Bedienerhandbuch PDF herunterladen

English

Quick Use Guide MC W770

Open the battery compartment of the remote control and insert

2 alkaline batteries, type AA (R06, UM-3).

1 Connect the speaker cables to the MC W770.

Use the supplied speakers only. Using other speakers

can damage the set or the sound quality will be

negatively affected.

2 Connect the AM/MW antenna.

3 Connect the FM antenna.

4 If you want to connect an additional appliance, use a cinch

cable to connect the audio inputs of the MC W770 to the

audio outputs of the additional appliance.

5 Check whether the mains voltage as shown on

the type plate corresponds to your local mains

voltage. If it does not, consult your dealer or

service organisation.

Make sure all connections have been made

before switching on the mains supply.

Connect the AC power cord supplied to

AC MAINS ~ and to the wall socket.

Supplied accessories

1 Insert batteries

2 Connect speakers, antennas, an additional appliance (optional)

and the AC power cord

– PC link software installer CD-ROM

– Wireless USB adapter and extension cable

– Remote control and 2 batteries, size AA

–2 loudspeaker boxes including

2 speaker cables

– AM/MW loop antenna

– FM wire antenna

– AC power cord

This Quick Use Guide gives a rough

overview and helps to start quickly with

basic steps. Please read the supplied

instruction manual for detailed

information.

MC-W770 QUG/22.1 eng 8/23/01 10:45 Page 1

1 2 3 4

Inhaltsverzeichnis

Seite 1 - 1 Insert batteries

1EnglishQuick Use Guide MC W770Open the battery compartment of the remote control and insert2 alkaline batteries, type AA (R06, UM-3).1 Connect the sp

Seite 2 - 4 Play your discs on the set

23 Install the tuner1 When the AC power cord is connected for the ﬁrst timeto the wall socket, TUNER and AUTO INSTALL - PRESSPLAY are displayed.2 Pres

Seite 3 - USB adapter

31 Add your MP3 music folders and ﬁles to the Philips Media Manager, during or afterinstallation of Philips Media Manager. Only those folders and ﬁles

Seite 4 - 9 Demonstration mode

4 3103 305 2021.2 PDCC-LC/JW-0435 7 Setting the clock8 Timer setting1 Press and hold CLOCK on theremote control for more than2 seconds.➜ SET CLOCK is