Philips CD360 Bedienungsanleitung PDF herunterladen (Seite 5)

5

Active mobile phones in the vicinity may cause •

interference.

Metallic objects may be retained if placed near

•

or on the handset receiver.

SAVE THESE INSTRUCTIONS

•

Power requirements

This product requires an electrical supply •

of 120 volts AC. In case of power failure,

the communication can be lost.

The voltage on the network is classied •

as TNV-3 (Telecommunication Network

Voltages), as dened in the standard UL

60950.

Warning

The Electrical network is classied as •

hazardous. The only way to power down the

charger is to unplug the power supply from

the electrical outlet. Ensure that the electrical

outlet is always easily accessible.

About operating and storage temperatures

Operate in a place where temperature is •

always between 0°C to +35°C (32°F to

95°F).

Store in a place where temperature is •

always between -20°C and +45°C (-4° F

to 113° F).

Battery life may be shortened in low •

temperature conditions.

Equipment approval

Information

Your telephone equipment is approved for

connection to the public switched telephone

network and is in compliance with parts

15 and 68, FCC Rules and Regulations and

the Technical Requirements for Telephone

Terminal Equipment published by ACTA.

1 Important safety

instructions

When using your telephone equipment, basic

safety precautions should always be followed

to reduce the risk of re, electric shock and

injury to persons, including the following:

Caution

Use only the supplied batteries and adaptor •

Do not allow the charging contacts or the •

battery to come into contact with metal

objects.

Do not open the handset, base station or

•

charger as you could be exposed to high

voltages.

Do not allow the charger to come into contact

•

with liquids.

Risk of explosion if battery is replaced by an

•

incorrect type.

Dispose of used batteries according to the

•

instructions.

Always use the cables provided with the

•

product.

For pluggable equipment, the socket-outlet

•

shall be installed near the equipment and shall

be easily accessible.

Handsfree activation could suddenly increase

•

the volume in the earpiece to a very high level:

make sure the handset is not too close to your

ear.

This equipment is not designed to make

•

emergency calls when the power fails. An

alternative has to be made available to allow

emergency calls.

Do not expose the phone to excessive heat

•

caused by heating equipment or direct sunlight.

Do not drop your phone or allow objects to

•

fall on your phone.

Do not use any cleaning agents containing

•

alcohol, ammonia, benzene, or abrasives as

these may harm the set.

Do not use the product in places where there

•

are explosive hazards.

Do not let small metal objects come into

•

contact with the product. This can deteriorate

audio quality and damage the product.

English

EN

1 2 3 4 5 6 7 8 9 10 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare