Philips NORELCO 2 Bedienungsanleitung

NetCam2Installation InstructionsEngPhilipsCommunication,Security & ImagingLens optionalDefault IP address: 211.53.133.92Administrator login: Passw

Description on LED of Ethernet PortYellow LED: This LED indicates the status ofdata transmission. After power is supplied, it ison for the first 4-5 s

2 INSTALLATION2.1 Installation summary• Connect Ethernet and power to the NetCam2 on a local network forconfiguration (see 2.1.3).• Install the setu

2.1.4 Connecting NetCam2 to a PC using crossover cableFIgure 2-2Connecting NetCam2 to a PC using a crossover (cross link) Network cable.2.1.5 Connecti

2.1.6 PSTN dial-in connection1. Connect a PSTN modem to the NetCam’s RS232 serial port.2. Ensure that the modem is selected as connected device in the

2.3 Assigning IP Address and Starting ConfigurationIt is possible to setup a NetCam2 that is either connected to a local network ordirectly connected

1. Using ARP in Windows 98 and NT• Start a DOS window and type the following commands.• Example2. Using ARP in Windows 95• Start a DOS window and type

• If you succeed in utilizing the above commands, you will receive acontinuous connection. Stop the process by pressing <Ctrl>+<C> keys.•

3. OPERATIONThis section looks at accessing the NetCam2’s homepage and monitoring real-time images. The NetCam2’s own web pages are accessed through o

Note: Program installation takes less than 1 minute. Do not click any button untilthe ‘Active-X Control’ installation is completed.3.3 Various viewers

HomepageOn the NetCam2 Homepage there are four viewing options. Users may monitorreal-time images via these main viewers. The four viewers are:• Lite

IMPORTANT SAFEGUARDS1. Read Instructions: All the safety and operating instructions should be readbefore the unit is operated.2. Retain Instructions

The homepage displays one image. The following can be selected using pull-down menus:• Select View – camera 1, 2 or all cameras.• Resolution – set ima

21Selecting and controlling camerasThe user may select the following viewing options (active selection is highlightedin yellow):• ‘Camera selection’:

• ‘Frame rate’: Select the image transmission speed.Note: Transmission speed depends on network capacity and PC performance.NetCam2 transmits a maximu

3.3.3 Real-time monitoring through Full viewer (dual image)To use the Full viewer in quad mode:• Click on the quad icon in ‘Camera Select’Compared to

3.3.4 Real-time monitoring through Lite Viewer (single view)The Lite Viewer has much of the functions of the Full Viewer, Its size is reducedto overco

3.3.5 Real-time monitoring through Lite viewer (dual image)Compared to Lite Viewer in single shot mode, the dual mode does not have thefollowing contr

3.3.6 Real-time monitoring through Server-push viewerIf there is a firewall on the network where the NetCam2 is connected, theNetCam2 can be accessed

3.3.7 Real-time monitoring through Java applet ViewerThe Java applet viewer is for access to NetCam2 through a computer that doesnot use Microsoft Win

4 CONFIGURING ADMINISTRATOR’S OPTIONS4.1 Login4.1.1 Accessing Administration from Setup program• Click on the MAC address of the NetCam2.• Type in t

4.2 Administrator’s page4.2.1 System ConfigurationThis page is for setting name, date, location and description of the NetCam2• NetCam Name – Type i

12. Damage Requiring Service: Unplug the unit from the outlet and referservicing to qualified service personnel under the following conditions.If liq

• Chassis version – Click on 'Detailed H/W Information' to view the detailedhardware information such as maximum number of channels, serial

• Administrator’s E-mail Address – type in the administrator’s e-mail address(this information is for information only).• Initialize Flash Info – thi

• User Account – account names can be changed using unique names (max. 9characters). The default administrator's name is 'Admin'. The d

33• DHCP Client Protocol• If enabled, the NetCam2 automatically sets all addresses by detectingthem from the DNCP server. The detected addresses are n

xDSL InterfaceIf the NetCam2 is connected to an xDSL line and uses PPPoE communication,select 'xDSL Interface'• User ID – enter the user pas

• User ID – enter the user password • Password – enter the user password To configure the PSTN interface:• Enter user ID.• Enter the password thatr yo

• IP/Subnet Filtering Mode – to temporarily disallow a registered useraccessing a NetCam2, the access IP addresses can be changed. If ‘IP/SubnetFilter

IP Subnet filtering rules• A total of 10 lines can be entered.• Each line has the option of 'Allow' or 'Deny' access to a Subnet.•

4.2.6 Video Configuration • Video Channel Select – it is possible to configure each individual channel.Select the Camera to configure from the pull-d

Advanced configuration Advanced calibration parameters can be entered for each channel.Calibration Parameters • Adjust the screen settings to optimise

SAFETY PRECAUTIONSThis label may appear on the bottom of the unit due to space limitations.The lightning flash with an arrowhead symbol, within an equ

Caption options• Select 'Black' for black text on a light background.• Select 'White' for white text on a dark background.• Select

4.2.7 Application Configuration• Video Channel Selection - select a Camera to configure. The two channelsshown are the same as in ‘Video Configuratio

• Recipient E-mail Address – designate a person to receive an e-mail after theevent alarm triggers images. • Sender E-mail Address – enter the 's

FTP event configurationSet the sending conditions for an FTP event. The setting methods for FTP aresame as that for E-mail (see above).4.2.8 Pan/Tilt

4.2.9 Serial Configuration• Serial Port Selection – select a serial port to configure. NetCam2 has twoserial ports. Serial #1 is a RS232C interface p

4.2.10 Digital Input ConfigurationThe sensor (alarm) inputs comprise LED type photo-couplers. The specificationof the input is 5 to 12 Vdc at 10 to 2

4.2.11 Alarm Configuration • Motion Detection Threshold – sets the threshold for the motion detectionfunction. Threshold ‘0’ is the most sensitive st

4.2.12 User Custom Configuration• Web Server TCP Port – assigns the TCP port of the NetCam2 throughwhich people can access the NetCam2 and through wh

5 CONVENIENT FUNCTIONS OF MOUSEA small window of 5 functions appears when you click the right mouse buttonin the video picture. Users who have the au

4 Image qualityYou set the image quality of the complete image per channel. If you choose‘Level 9’, the NetCam2 sends the finest image. However, tr

TABLE OF CONTENTSIMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2FCC INFORMATION . . . .

6 ADJUSTING FOCUS 1 First, adjust focus of the NetCam2 by turning the front focus ring of thelens.2 If you cannot focus with the lens, loosen the sc

51NetCam2NetCam2 _ii_00592en.qxd 1/23/03 2:22 PM Page 51

9922 141 00592en 03-03  2003 Philips Electronics N.V.Data subject to change without noticeNetCam2 _ii_00592en.qxd 1/23/03 2:22 PM Page 52

TABLE OF CONTENTS4.2 Administrator’s page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294.2.1 System Config

1 INTRODUCTIONNetCam2 is a network-based high-resolution digital network camera for CCTVapplications. It contains an integrated Internet server and co

1.2 UnpackingUnpack carefully and handle all electronic equipment with care to preventdamage. Check for the following items:• NetCam2 - Web Camera Ser

RS232/RS422/RS485/Sensor Input9NetCam2 Section 1Connector Description RemarknameVideo Output of internal camera or input for channel 2 as set by DIP