Philips Q552.2L Spezifikationen Seite 37
- Seite / 179
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Service Modes, Error Codes, and Fault Finding
EN 37Q552.2L LA 5.
2011-Jul-15
back to
div. table
5.8.13 SSB Replacement
Follow the instructions in the flowchart in case a SSB has to be
exchanged. See figure “SSB replacement flowchart”.
Figure 5-11 SSB replacement flowchart
H_16771_007a.eps
100402
START
C onnect the U SB stick to the set,
go to SAM and save the current TV settings via “Upload to USB”
Set is still operating?
Yes
1. Disconnect the WiFi module fr om the PC I c onnec tor (only for Q549.x SSB)
2. Replace the SSB by a Service SSB.
3. Place the WiFi module in the PCI connector.
4. Mount the Service SSB in the set.
Set behaviour?
Yes
No
No
Instruction note SSB replacem ent Q543.x, Q548.x, Q549.x, and Q55x.x
Before starting:
- prepare a USB memory stick with the latest software
- download the latest Main Software (Fus) from www.p4c.philips.com
- unzip this file
- create a folder ”upgrades” in the root of a USB stick (size > 50 MB) and
save the autorun.upg file in this "upgrades" folder.
Note: it is possible to rename this file, e.g."Q54x_SW_version.upg"; this in
case there are more than one "autorun.upg" files on the USB stick.
No picture displayed
Picture displayed
Set is starting up without software
upgrade menu appearing on screen
Picture displayed
Set is starting up with software
upgrade menu appearing on screen
Due to a possible wrong display option code in the received Service
SSB (NVM), it’s possible that no picture is displayed. Due to this
the download application will not be shown either. This tree enables you
to load the main software step-by-step via the UART logging on the PC
(this for visual feedback).
Start-up the set
1) Start up the TV set, equiped with the Service
SSB,
and enable the UART logging on the PC.
2) The TV set will start-up automatically in the
download application if main TV software is not loaded.
3) Plug the prepared USB stick into the TV set. Follow the
instructions in the UART log file, press “Right” cursor key to enter
the list. Navigate to the “autorun.upg” file in the UART logging
printout via the cursor keys on the remote control. When the
correct file is selected, press
“Ok”.
4) Press "Down" cursor and “Ok” to start flashing the main
TV software. Printouts like: “L: 1-100%, V: 1-100% and
P: 1-100%” should be visible now in the UART logging.
5) Wait until the message “Operation successful !” is logged in
the UART log and remove all inserted media. Restart the TV set.
1) Plug the USB stick into the TV set a
nd select
the “autorun .upg” file in the displayed browser.
2) Now the main software will be loaded automatically,
supported by a progress bar.
3) Wait until the message “Operation successful !” is displayed
and remove all inserted media. Restart the TV set.
Set the correct “Display code” via “06259
8 -HOME- xxx” where
“xxx” is the 3 digit display panel code (see sticker on the side
or bottom of the cabinet)
After entering the “Display Option” code, the set is going to
Standby
(= validation of code)
Restart the set
Connect PC via the ComPair interface to Service connector.
Start TV in Jett mode (DVD I + (OSD))
Open ComPair browser Q54x
Program set type number, serial number, and di
splay 12 NC
Program E - DFU if needed.
Go to SAM and reload settings
via “Download from USB” function.
In case of settings reloaded from USB, the set type,
serial number, display 12 NC, are automatically stored
when entering display options.
- Check if correct “display option” code is programmed.
- Verify “option codes” according to sticker inside the set.
- Default
settings for “white drive” > see Service Manual.
Q54x.E SSB Board swap – VDS
Updated 22-03-2010
If not already done:
Check latest software on Service website.
Update main and Stand-by software via USB.
Check and perform alignments in SAM according to the
Service Manual. Option codes, colour temperature, etc.
Final check of a
ll menus in CSM.
Special attention for HDMI Keys and Mac address.
Check if E - D F U is present.
End
Attention point for Net TV: If the set type and serial number are not
filled in, the Net TV functionality will not work. It will not be possible
to connect to the internet.
Saved settings
on USB stick?
- Color Television Chassis 0
- Mechanical Instructions 1
- EN 10 Q552.2L LA4 1
- B03H B03H 2
- B04A B04A 3
- B04B B04B 4
- B04C B04C 5
- B04D B04D 6
- B04E B04E 7
- B05A B05A 8
- B06A B06A 9
- B06B B06B 10
- B06C B06C 11
- EN 11Q552.2L LA 4 12
- B06D B06D 13
- B09A B09A 14
- 10-8 313912365213 SSB Layout 15
- EN 113Q552.2L LA 10 16
- 10-9 B01 313912365214 17
- B01A B01A 18
- B01B B01B 19
- B01C B01C 20
- B01D B01D 21
- B01E B01E 22
- EN 12 Q552.2L LA4 23
- B01F B01F 24
- B01G B01G 25
- B01H B01H 26
- B01I B01I 27
- B01J B01J 28
- B01K B01K 29
- B02A B02A 30
- B02B B02B 31
- B02C B02C 32
- B02D B02D 33
- EN 13Q552.2L LA 4 34
- B02E B02E 35
- B02F B02F 36
- B02G B02G 37
- B02H B02H 38
- B02I B02I 39
- B03A B03A 40
- B03B B03B 41
- B03C B03C 42
- B03D B03D 43
- B03E B03E 44
- EN 14 Q552.2L LA4 45
- B03F B03F 46
- B03G B03G 47
- EN 15Q552.2L LA 4 56
- 4.2 Service Positions 56
- EN 154Q552.2L LA 10 61
- EN 155Q552.2L LA 10 62
- Leading Edge Module 63
- EN 16 Q552.2L LA4 67
- AL1A AL1A 68
- AL1B AL1B 70
- AL3A AL3A 71
- AL3B AL3B 75
- AL3C AL3C 76
- EN 17Q552.2L LA 4 78
- Layout Top 81
- Layout Bottom 81
- 1M83 1M85 83
- EN 176Q552.2L LA 10 85
- 11. Styling Sheets 86
- EN 178Q552.2L LA 11 87
- Styling Sheets 87
- SUNDANCE 42" - 47" 88
- EN 18 Q552.2L LA4 89
- (xxPFL8xxx/xx series) 89
- EN 19Q552.2L LA 4 90
- 1. Revision List 91
- EN 20 Q552.2L LA4 92
- EN 21Q552.2L LA 4 93
- 4.5 Set Re-assembly 93
- EN 22 Q552.2L LA5 94
- 5.1 Test Points 94
- 5.2 Service Modes 94
- EN 23Q552.2L LA 5 95
- EN 24 Q552.2L LA5 96
- Hibernate 97
- Stand by or 98
- Protection 98
- Enter protection 98
- Semi-Standby 99
- Semi Standby 100
- REAR CONNECTORS 102
- BOTTOM REAR CONNECTORS 102
- SIDE CONNECTORS 102
- Stand by 104
- Semi Stand by 104
- EN 32 Q552.2L LA5 105
- 5.4 Service Tools 105
- 5.5 Error Codes 105
- EN 33Q552.2L LA 5 106
- EN 34 Q552.2L LA5 107
- 5.7 Protections 107
- EN 35Q552.2L LA 5 108
- EN 36 Q552.2L LA5 109
- EN 37Q552.2L LA 5 110
- EN 38 Q552.2L LA5 111
- EN 39Q552.2L LA 5 112
- 5.9 Software Upgrading 112
- EN 4 Q552.2L LA2 113
- 2.4 Chassis Overview 113
- EN 40 Q552.2L LA5 114
- 6. Alignments 115
- Alignments 116
- EN 42 Q552.2L LA6 116
- 6.4 Option Settings 116
- EN 43Q552.2L LA 6 117
- EN 44 Q552.2L LA6 118
- EN 45Q552.2L LA 6 119
- EN 46 Q552.2L LA6 120
- 6.5 Reset of Repaired SSB 120
- 6.6 Total Overview SAM modes 120
- EN 47Q552.2L LA 6 121
- 7. Circuit Descriptions 122
- Circuit Descriptions 123
- EN 49Q552.2L LA 7 123
- EN 5Q552.2L LA 3 124
- 3.1 Safety Instructions 124
- 3.2 Warnings 124
- 3.3 Notes 124
- 2011-Jul-15 125
- EN 51Q552.2L LA 7 126
- 7.6 HDMI 126
- EN 52 Q552.2L LA7 127
- 7.8 Ambilight 127
- EN 53Q552.2L LA 7 128
- 8. IC Data Sheets 129
- Block diagram 130
- Pinning information 130
- ST1S10PH 134
- EN 6 Q552.2L LA3 135
- 3.4 Abbreviation List 135
- LD1117DT 136
- Personal Notes: 140
- 9. Block Diagrams 141
- " PLDE-P008A 142
- " PLDG-P010A 142
- " - 47" PLDHP018A 143
- PNX85537 144
- EN 7Q552.2L LA 3 146
- 9-6 Block Diagram I 148
- 9-7 Supply Lines Overview 149
- EN 8 Q552.2L LA3 157
- 4. Mechanical Instructions 168
Verwandte Produkte und Handbücher für Fernseher & Monitore Philips Q552.2L
(3 Seiten)
(59 Seiten)
(79 Seiten)
(440 Seiten)
(3 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.122 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern