Philips M1351A Bedienungsanleitung PDF herunterladen (Seite 165)

Introduction

Appendix A Modem Interface Module 155

Modem Interface Module

Introduction

The modem interface module allows fetal trace information to be transmitted from a Series

50 A/IP-2 Fetal Monitor to a receiver that is part of an OB

TraceVue system.

The modem interface module (with the addition of an approved PCMCIA modem) enables

fetal traces to be transmitted over a standard telephone line. The receiver software displays

the trace information, allowing it to be reviewed, printed and stored.

Warning

To avoid possible electrical hazards:

Whenever a patient is connected to the fetal monitor the cable to the telephone system

must be disconnected.

Never touch open contacts on the cable which is connected to the telephone system.

Fitting the Modem Interface Module

To connect the modem interface module:

1. Remove the cover (or any other interface module) from the Interface Socket on the

monitor.

2. Connect the modem interface module to the Interface Socket.

3. Once the module is fitted, secure it in position by fixing it to the base of the monitor

with the screw provided.

Figure 11-14 Fitting the Modem Interface Module

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 188 189

Keine Kommentare

Philips M1351A Bedienungsanleitung Seite 165