Philips FC7070/01 Bedienungsanleitung PDF herunterladen (Seite 25)

Problem Possible cause Solution

The inside of the mop-

ping nozzle is too dirty.

Clean the mopping nozzle (see chapter ‘Cleaning and

maintenance’, section ‘Cleaning the mopping nozzle’).

The mopping brushes are

not present.

Place the mopping brushes in the mopping nozzle

(see chapter ‘Cleaning and maintenance’, section

‘Reassembling the mopping nozzle’).

The mopping brushes are

worn.

Replace the mopping brushes (see chapter ‘Replacing

the mopping brushes’).

The sound of

the appliance

changed while

cleaning.

The active protection

system may have been

activated for three

reasons: (1) the appli-

ance picked up a foreign

object, (2) the mopping

brushes are too wet or

(3) you have moved the

appliance over a carpet.

The mopping brushes

automatically stopped

rotating because they

encountered too heavy

resistance. The appli-

ance continues to make

a sound, but it does not

work properly.

Release the power-on button to switch off the ap-

pliance. Put the appliance upright in parking position

(‘click’) and pull the plug out of the wall socket. Open

the mopping nozzle lid, remove the mopping brush

cover and remove the object. Reinsert the mopping

brush cover, close the mopping nozzle lid, put the

plug in the wall socket and switch on the appliance

again (see chapter ‘Using your AquaTrio’, section



object, the active protection system may have been

activated because the mopping brushes are too wet

(see next cause and solution) or because you moved

the appliance over a carpet. Pull the plug out of the

wall socket, open and close the mopping nozzle lid,

put the plug in the wall socket again, switch on the

appliance and start cleaning again.

If the above solutions did not help and the appliance

still does not work, switch on the appliance for at

least 10 seconds. Then open and close the mopping

nozzle lid, switch on the appliance and start cleaning

again.

The active protection sys-

tem has been activated

because the brushes are

too wet. The mopping

brushes automatically

stopped rotating because

they encountered a too

heavy resistance.

Release the power-on button to switch off the ap-

pliance. Put the appliance upright in parking position

(‘click’) and pull the plug out of the wall socket.

Remove the mopping brushes from the mopping

nozzle and remove excess water from the mopping

brushes by squeezing them over a sink (see chapter

‘Cleaning and maintenance’, section ‘Cleaning the

mopping nozzle’). Then you can reinsert the mopping

brushes, reinsert the mopping brush cover, close the

mopping nozzle lid, put the plug in the wall socket

and switch on the appliance again (see chapter

‘Cleaning and maintenance’, section ‘Reassembling

the mopping nozzle’). If this does not work, let the

mopping brushes dry (see chapter ‘Cleaning and

maintenance’, section ‘Cleaning the mopping nozzle’).

ENGLISH

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 229 230

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips FC7070/01 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Staubsauger Philips FC7070/01