Philips 6853XL Bedienungsanleitung PDF herunterladen (Seite 8)

ENGLISHENGLISH 1514

1 Turn razor to Off (O) position,remove plug

fromoutlet and disconnect cord from razor.

C 2 Press the Razor Head Release Button and

remove Razor Head Assembly from the

razor unit.

C 3 Brush the inside of the razor housing.

4 Turn Razor Head Assembly over so that

underside is exposed.

C 5 Turn wheel of frame counterclockwise.

6 Remove the frame and brush clean.

C 7 Remove and clean one cutter and comb at

a time.

Do not clean more than one cutter and comb at

a time,since they are all matching sets. If you

accidentally interchange the cutters and combs,it

could take several weeks before optimal shaving

performance is restored.

8 Separate the cutter from the comb.

C 9 Only brush the cutter in an upward

motion.Use the short bristled side of the

brush.

3 Replace razor head assembly.Cleaning

Once a week:Razor

◗ Regularcleaningguaranteesbettershaving

results.

Always turn razor off,unplug from outlet and

remove cord from razor before cleaning.

C 1 Clean the top of the razor with the

supplied brush.

C 2 Press the Razor Head Release Button and

remove Razor Head Assembly from the

razor unit.

C 3 Brush out hairs from the inside of Razor

Head Assembly and hair chamber.

C 4 ReplacetheRazorHeadAssemblybackon

razor.

Every Two Months:Razor Head

Do not mix up the cutters andcombs asthe

shavingperformance may be adversely affected

for several weeks before optimal shaving

performance is restored.

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare