Philips Saeco Royal Kaffeevollautomat Bedienungsanleitung PDF herunterladen (Seite 46)

PROGRAMMING THE MACHINE

Cup heating plate connection

Royal Professional is equipped with a useful cup

heating plate which can be disconnected, if

required.

Press keys

to move the asterisk to item

“CUP HEATER”. Press ENT to activate this

function.

The following message will be displayed:

"CUP HEATER "

"ON "

The keys allow you to change the set

options “ON” or “OFF”.

Temperature selection

With Royal Professional a precise adjustment of

the coffee temperature can be executed. Move

the asterisk at the end of the line to the menu items

“Temp. l. coffee”, “Temp. coffee” or

“Temp. s. coffee” and select it by means of

the ENT key.

Depending on the selection, the following

messages will be displayed:

"TEMP. L. COFFEE "

"MEDIUM "

"TEMP. COFFEE "

"MEDIUM "

"TEMP. S. COFFEE "

The keys allow you to change the set options

“Minimum”, “low”, “medium”, “high” or

“maximum”.

Pre-brewing function

As soon as the coffee has been moistened, the

pump stops for a while in order to allow a better

utilization of the coffee powder.

Move the asterisk at the end of the line to the

menu item “PREBREWING” and select it by

means of the ENT key.

The following message will be displayed:

"PREBREWING "

"ON "

The keys allow you to change the set

options “ON”, “OFF”,“LONG” (in the latter

case the pump stop is longer).

Pregrinding function

By activating this function, grinding occurs every

time the doser is empty. So a ground coffee

portion is always ready in the doser, allowing a

time saving whenever the machine is often used.

This function is not recommended in all other

cases, because fresh ground coffee is by far

better.

Press keys

to move the asterisk to item

“PREGRINDING”. Press ENT to activate this

function.

The following message is displayed:

"PREGRINDING "

"ON "

The keys allow you to change the set

options “ON”, “OFF”.

Hot water programming

Whenever this function is enabled, the selected

water amount is constantly dispensed. On the

contrary, whenever this function is disabled hot

water is dispensed until the user stops the

dispensing. Hot water amount can only

be programmed with programming

mode enabled.

- “PROG. H. WATER”. Press ENT to activate

this function.

The following message will be displayed:

"PROG. H. WATER "

"ON "

The keys allow you to change the set

options: “ON”, “OFF”.

Cappuccino programming

Whenever this function is enabled, the same

amount of cappuccino is constantly dispensed.

On the contrary, whenever this function is disabled,

cappuccino is brewed until the user stops the

dispensing. Cappuccino amount can only

be programmed with programming

mode enabled.

Press keys

to move the asterisk to item

“PROG.CAPUC.”. Press ENT to activate this

function:

The following message will be displayed:

"PROG. CAPUC. "

"ON "

The keys allow you to change the set

options: “ON”, “OFF”.

Coffee counter

Press keys

to move the asterisk to item

“TOTAL COFFEE” and select it by means of the

ENT key. The following message will be

displayed:

"TOTAL COFFEE "

" 1234... "

This value cannot be modified. Quit the menu by

means of the ENT or ESC keys.

Descaling

Move the asterisk at the end of the line to menu

item “Descaling” and select it by means of the

ENT key.

The following message will be displayed:

"DESCALING "

For descaling procedure, see page 85.

Timer

The timer enables the automatic switching off of

the machine after a preset period, which can be

set from 15 minutes to 12 hours after last

dispensing. If after a few seconds coffee is

brewed again, the timer is reset. If the value set

is 0:00, the timer function is not activated and

the machine does not switch off.

Move the asterisk at the end of the line to menu

item “Timer” by means of the keys

Press ENT to select this item.

The following message will be displayed:

"STANDBY "

"AFTER 0:00"

By means of the same keys , select the

suitable time and confirm the value through ENT

button.

When the selected time is over the following

message is displayed:

"ENERGY "

"SAVING "

The machine stops and can be switched on

again by means of button

“standby”.

Vending functions

Royal Professional is equipped with a counter

allowing the machine statistic analysis while

detecting the different dispensing operations. It is

also equipped with another counter which is

able to stop the dispensing operations after a

certain number. These functions are protected by

a special access code.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips Saeco Royal Kaffeevollautomat Bedienungsanleitung Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Philips Saeco Royal Kaffeevollautomat