Philips Wasserkocher Bedienungsanleitung PDF herunterladen (Seite 10)

Thelightoftheselectedtemperaturelightsup.

Note: If you cannot set the desired temperature, the current temperature of

the water in the kettle is higher than the temperature you want to set. The

current temperature is shown by the number of lights that are on.

3 Presstheon/offbuttontoswitchontheappliance(Fig.6).

Note: If you do not press the on/off button within 10 seconds after setting

the temperature, the set temperature is lost.

Whilethewaterheatsup,thecurrenttemperatureisshownbythe

numberoflightsthatareonandthelightofthesettemperature

ashes.(Fig.11)

Whenthekettlehasreachedthesettemperature,youhearan

audiblesignal(onebeep)andthekettleswitchesoffautomatically.

Thelightringaroundtheon/offbuttongoesoff.

Thelightofthesettemperaturestaysonfor120secondstolet

youknowthewaterhasjustreachedthepresettemperature.

Youcanadjustthesettemperaturewhilethekettleisoperating.Thisis

onlypossibleifthetemperatureofthewaterisstillbelowthenewlyset

temperature.

Note: If you remove the kettle from the base, the set temperature is lost.

Keeping water warm

Youcanusethekeep-warmfunctiontokeepwaterwarmata

temperatureof100°,80°,60°Cor40°C.

Therearetwowaystokeepwaterwarm:atthecurrenttemperature,or

atatemperaturehigherthanthecurrenttemperature.

Onlyusethekeep-warmfunctionwhenthereisatleast0.5lwaterin

the kettle. If there is too little water in the kettle, the kettle may switch

offwithin30minutestoprotecttheheatingelement.

1 Selectakeep-warmmethod.

ENGLISH10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 159 160

Keine Kommentare

Philips Wasserkocher Bedienungsanleitung Seite 10