Philips GC1421 Bedienungsanleitung PDF herunterladen (Seite 3)

5 Unplug the iron when the temperature light goes out.

6 Hold the iron over the sink and set the steam control to the Calc-Clean

position .

7 Hold the steam control at the Calc-Clean position and gently shake the iron

until all the water in the tank has been used up (Fig. 8).

, Steamandboilingwatercomeoutofthesoleplate.Scale(ifany)isushedout.

8 AfteryouhaveusedtheCalc-Cleanfunction,setthesteamcontroltothe‘no

steam’ position.

9 Repeat the Calc-Clean process if the water that comes out of the iron still

contains scale particles.

After the Calc-Clean process

1 Connect the iron to the mains to let the soleplate dry.

2 Unplug the iron when the temperature light goes out.

3 Move the iron gently over a piece of used cloth to remove any water stains

that have formed on the soleplate.

4 Let the iron cool down before you store it.

Storage

1 Unplug the appliance and set the steam control to the ‘no steam’ position.

2 Empty the water tank (Fig. 9).

3 Wind the mains cord round the cord storage facility. (Fig. 10)

4 Store the iron on its heel in a safe and dry place.

Environment

- Do not throw away the appliance with the normal household waste at the end

of its life, but hand it in at an ofcial collection point for recycling. By doing this,

you help to preserve the environment (Fig. 11).

Guarantee & service

If you need service or information or if you have a problem, please visit the Philips

website at www.philips.com or contact the Philips Consumer Care Centre in your

country (you nd its phone number in the worldwide guarantee leaet). If there is

no Consumer Care Centre in your country, go to your local Philips dealer.

Troubleshooting

This chapter summarises the most common problems you could encounter with your

iron. If you are unable to solve the problem, contact the Consumer Care Centre in

your country.

Problem Cause Solution

The iron is plugged

in but the soleplate

is cold.

There is a connection

problem.

Check the mains cord, the plug and

the wall socket.

The temperature dial

is set to MIN.

Set the temperature dial to the

required temperature.

The iron does

not produce any

steam.

There is not enough

water in the water

tank.

Fill the water tank (see chapter

‘Preparing for use’).

The steam control is

set to the ‘no steam’

position.

Set the steam control to a steam

setting (see chapter ‘Using the

appliance’).

Water leaks from

the soleplate

during ironing.

The iron is not hot

enough.

Set the temperature dial to a

temperature suitable for steam

ironing (

2 to MAX). Put the

iron on its heel and wait until the

temperature light goes out before

you start ironing.

Flakes and

impurities come

out of the

soleplate during

ironing.

You have used hard

water, which has

caused scale akes

to develop inside the

soleplate.

Use the Calc-Clean function one or

more times (see chapter ‘Cleaning

and maintenance’).

Water leaks from

the soleplate while

the iron cools

down or after it

has been stored.

You have put the iron

in horizontal position

while there is still

water in the water

tank.

Empty the water tank and set the

steam control to the ‘no steam’

position before you store the iron

(see chapter ‘Storage’). Store the

iron on its heel.

4239.000.7060.3

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips GC1421 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eisen Philips GC1421