Philips AZ3830/12 Bedienungsanleitung PDF herunterladen (Seite 7)

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of

plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an

appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a

value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board

should not be greater than 3 Amp.

Note:The severed plug must be disposed of to avoid a possible shock hazard should it

be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N),

brown = live (L). As these colours may not correspond with the colour markings iden-

tifying the terminals in your plug, proceed as follows:

• Connect the blue wire to the terminal marked N or coloured black.

• Connect the brown wire to the terminal marked L or coloured red.

• Do not connect either wire to the earth terminal in the plug, marked E (or e) or

coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the

sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. See Copyright Act 1956 and

The Performer’s Protection Acts 1958 to 1972.

Disposal of your old product

Your product is designed and manufactured with high quality materials and components,

which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to

a product it means the product is covered by the

European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for electrical and elec-

tronic products.

Please act according to your local rules and do not dispose of your old products with

your normal household waste.The correct disposal of your old product will help prevent

potential negative consequences for the environment and human health.

USB Connection

Auxiliary connection

Deleting audio files on a

USB device

1 Press repeatedly SOURCE (or USB on

the remote contorl) to select USB mode.

2 Plug a USB mass storage device.

3 Select the track you want to delete before

or during playback.

• In the stop position, you may select an

album to delete.

4 Briefly press DEL on the remote contorl.

➜ “D TRK” is displayed, flashing (see 0).

5 To not to delete, wait until flashing D TRK

disappears after 4 seconds of flashing, or

just press 9.

Helpful hints:

– For some MP3 players, AZ3830 will read it

as only one folder which will wrap up all the

audio files on the player regardless of more

than one folder on that player.

– AZ3830 may not be able to delete a file

/albume stored on some MP3 players.

Connecting an external device

You can listen to the sound of the connect-

ed external device through your AZ3830’s

speakers.

1 Press repeatedly SOURCE (or AUX on

the remote contorl) to select AUX mode.

2 Use a line-in cable (not supplied) to connect

AZ3830’s AUX jack (3.5 mm, located on the

top panel) to an AUDIO OUT or

headphone jack on an external equipment

(such as CD player, or VCR).

The making of unauthorized copies of

copy-protected material, including com-

puter programmes, files, broadcasts and

sound recordings, may be an infringe-

ment of copyrights and constitute a

criminal offence.This equipment should

not be used for such purposes.

ifu_az3830_euro_eng 2006.8.22 11:33 AM Page 7

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips AZ3830/12 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für CD Spieler Philips AZ3830/12