Philips Azur Fer vapeur Bedienungsanleitung PDF herunterladen (Seite 11)



- Do not throw away the appliance with the normal household waste at the end of its life, but

hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the

environment (Fig. 21).



If you need service or information or if you have a problem, please visit the Philips website at

www.philips.com or contact the Philips Consumer Care Centre in your country (you nd its phone

number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your country,

go to your local Philips dealer.



If the appliance does not work or does not work properly, rst check the list below. If the problem

is not mentioned in this list, the appliance probably has a defect. In that case we advise you to take

the appliance to your dealer or to an authorised Philips service centre.

Problem Possible cause Solution

The iron is

plugged in, but

the soleplate is

cold.

There is a connection

problem.

Check the mains cord, the plug and the wall

socket.

The temperature dial is set

to MIN.

Set the temperature dial to the required

position.

The iron does not

produce any

steam.

There is not enough water

in the water tank.

Fill the water tank (see chapter ‘Preparing for

use’, section ‘Filling the water tank’).

The steam control is set to

position 0.

Set the steam control to l or ; (see

chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’).

The iron is not hot enough

and/or the drip-stop

function has been activated.

Set an ironing temperature that is suitable for

steam ironing ( 2 to MAX). Put the iron on

its heel and wait until the amber temperature

light has gone out before you start ironing.

The iron does not

produce a steam

boost.

You have used the steam

boost function too often

within a short period.

Continue ironing in horizontal position and

wait a while before you use the steam boost

function again.

The iron is not hot enough. Set an ironing temperature at which the steam

boost function can be used ( 3 to MAX).

Put the iron on its heel and wait until the

amber temperature light has gone out before

you use the steam boost function.

Water droplets

drip onto the

fabric during

ironing.

You have not closed the

cap of the lling

opening properly.

Press the cap until you hear a click.

 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips Azur Fer vapeur Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Philips Azur Fer vapeur